Skip to main content

Posts

Showing posts with the label electrical properties

High Density Polyethylene (HDPE) and Polypropylene (PP) Polyblend: An Experimental Approach | Chapter 04 | New Advances in Materials Science and Engineering Vol. 1

The present research focuses to evaluate a complete outlook of virgin high density polyethylene (HDPE) and polypropylene (PP) polyblends. Virgin PP of 10, 20, 30, 40 and 50 weight % is compounded with virgin HDPE. Tensile, Flexural and impact test specimens of virgin HDPE, Virgin PP and HDPE-PP composites are prepared via twin screw extruder and injection moulding methods as per ASTM D638-02a (Type-I), ASTM D790 and ASTM D256-A standards respectively. The mechanical properties like tensile strength, flexural strength, Izod impact strength are examined. Polymer sheets are fabricated using a two roll milling machine and compression moulding; and its electrical properties like dielectric strength, surface resistivity, volume resistivity are examined according to ASTM-D 257 standard. The study also includes effect of strain rate on tensile properties of the prepared composite at a cross head speed of 30, 40, 50, 60 and 70 mm/min. Design of experiment is conducted to find parameters domi...

Effect of Concentration on Morphological, Optical and Electrical Properties of Copper Doped Zinc Oxide Thin Films Deposited by Electrostatic Spray Pyrolysis (ESP) Technique | Chapter 03 | New Advances in Materials Science and Engineering Vol. 1

Pure zinc oxide (ZnO) and copper (Cu) doped ZnO thin films were synthesised from the precursor’s concentrations (zinc acetate and copper acetate) onto glass substrate via electrostatic spray pyrolysis (ESP) deposition technique at 350°C in air ambient with different Cu doping concentrations (0%, 5%, 10%, 15% and 20%). The thin films were analysed with regards to its morphological, optical, and electrical properties before and after annealing. The results indicate that the annealing of the thin films leads to improved surface morphology and better crystallinity quality. Nanofibers were observed around the nucleation centre in the pure ZnO thin films. The absorbance was recorded in the wavelength range of 230 nm to 1100 nm, and the optical transmission of the films was found to increase for increasing doping concentration of Cu up to 370 nm and then decreased for higher wavelengths. ZnO:Cu films displayed high optical transparency which is around 86% - 98% in the visible and infrared ...