Evaluation and Optimization of Performance Characteristics of Wood Ash Particles Reinforced PP Resin (WARPP) | Chapter 10 | Current Research in Science and Technology Vol. 2
This study focused on Evaluation and
Optimization of Performance Characteristics of Wood Ash Particles Reinforced
Polypropylene Resin (WARPP). Taguchi robust design was used to plan a minimum
number of experiments needed to optimize the performance characteristics of
WARPP while response surface method (RSM) was used to model and optimize
performance characteristics of WARPP. The performance characteristics or
responses of WARPP for the mechanical properties are the result of the
interaction among the input variables – namely, particle size, volume fraction,
injection force and operating temperature. The optimum values of the mechanical
properties (tensile, flexural and hardness strength) of WARPP are 21.19MPa,
50.09MPa and 521.84MPa, respectively with their corresponding input variables
values of 0.25 mm, 1.40 mm and 1.40 mm for particle size, 5.0%, 5.0% and 60%
volume fraction, 120 ton, 200 ton and 200 ton injection force and 185ºC, 215ºC
and 215ºC operating temperature. The response model of WARPP for tensile,
flexural and hardness are representable with nonlinear power law model and second
order polynomial models respectively. Further investigations are recommended
for testing WARPP under higher temperature applications to ascertain its
performance at elevated temperatures.
Author(s) Details
P. S. Aguh
Department of Industrial and
Production Engineering, Nnamdi Azikiwe University, Awka, Anambra State,
Nigeria.
C. C. Ihueze
Department of Industrial and
Production Engineering, Nnamdi Azikiwe University, Awka, Anambra State,
Nigeria.
View Volume: https://doi.org/10.9734/bpi/crst/v2
Comments
Post a Comment