Skip to main content

Design and Optimization of Control Arm in a Solar Car Using QFD | Chapter 5 | New Approaches in Engineering Research Vol. 14

Solar automobiles have become increasingly popular. This technology is the right solution for a variety of difficulties that have been a source of concern for various industries, resulting in a contrast between modern mobility replacements and the ongoing pursuit of sustainability. Given this innovation's complex nature, achieving a successful structure necessitates the improvement of each component of the vehicle, including its mechanics, which is the focus of this project. The suspension system of the solar car, particularly the control arms, is thoroughly analysed throughout this project due to their extraordinary ability to play a crucial role in the vehicle's stability. The goal of this research is to use Quality Function Deployment and SolidWorks to build upper and lower control arms for a solar automobile. Control arms are an important component of a suspension system since they connect the chassis to the wheel hub. It also allows the vehicle to adapt to uneven conditions by keeping the wheel in contact with the ground at all times. Control arms were designed, examined, and optimised utilising engineering problem-solving approaches. However, the process used to attain those findings will be the main focus of this study, and it will be clearly detailed. The factor of safety (FOS) for the optimum design was 3.4, demonstrating the viability of the chosen tools, such as Quality Function Deployment (QFD), in determining the optimum solution for the specified engineering challenge.


Author (S) Details

Mehdi Moayyedian
College of Engineering and Technology, American University of the Middle East, Kuwait.

Ali Dinc
College of Engineering and Technology, American University of the Middle East, Kuwait.

Ali Alsarraf
College of Engineering and Technology, American University of the Middle East, Kuwait.

Walid Hamouda
College of Engineering and Technology, American University of the Middle East, Kuwait.

Abdolmohsen Almutairi
College of Engineering and Technology, American University of the Middle East, Kuwait.

Abdulaziz Bushehri
College of Engineering and Technology, American University of the Middle East, Kuwait.

Ahmad Deehani
College of Engineering and Technology, American University of the Middle East, Kuwait.


View Book https://stm.bookpi.org/NAER-V14/article/view/3524


Comments

Popular posts from this blog

Greening Regional Airports: A Vision for Carbon Neutral Infrastructure | Chapter 12 | Contemporary Perspective on Science, Technology and Research Vol. 3

 This study provides an overview of the energy demand of a regional airport, divided into individual time horizons. The electrification of aircraft systems raises the question of whether airports will be among the largest electricity consumers in our infrastructure in the future. Sustainability and especially emission reductions are significant challenges for airports that are currently being addressed. The Clean Sky 2 project GENESIS addresses the environmental sustainability of hybrid-electric 50-passenger aircraft systems in a life cycle perspective to support the development of a technology roadmap for the transition to sustainable and competitive electric aircraft systems. This article originates from the GENESIS research and describes various options for ground power supply at a regional airport. Potential solutions for airport infrastructure with a short (2030), medium (2040), and long (2050) time horizon are proposed. In addition to the environmental and conservation benefi...

There is No Standard Model of ZFC and ZFC2 | Chapter 03 | Advances in Mathematics and Computer Science Vol. 1

In this Chapter we obtain a contradictions in formal set theories under assumption that these theories have omega-models or nonstandard model with standard part. An possible generalization of Lob’s theorem is considered. Main results are: (i) ¬Con(ZF C+ ∃ M ZFC st ), (ii) ¬Con(N F+ ∃ M NF st ), (iii) ¬Con(ZF C 2 ), (iv) let k be an inaccessible cardinal then ¬Con(ZF C+ ∃ κ), (v) ¬Con(ZF C+ (V=L)), (vi) ¬Con(ZF+ (V=L)). Author   Details: Jaykov Foukzon Israel Institute of Technology, Haifa, Israel Men'kova Elena Romanovna All-Russian Research Institute for Optical and Physical Measurements, Moscow, Russia Read full article: http://bp.bookpi.org/index.php/bpi/catalog/view/46/221/408-1 View Volume: https://doi.org/10.9734/bpi/amacs/v1

Occipital Dermal Sinus Tract Causing Craniospinal Infection: A Review | Chapter 13 | New Visions in Medicine and Medical Science Vol. 4

  Dermal sinus is a rare congenital condition characterized by a pathological tract connecting the skin to deeper tissues of the central nervous system, potentially leading to severe infectious complications. It arises from a failure in the separation of ectodermal layers during early gestation. Diagnosing dermal sinus tract in newborns requires a careful physical examination, focusing on midline dimples in the occipital region associated with cutaneous abnormalities like hairy nevus or hyperpigmentation. The presence of drainage, abnormal hair distribution, or localized swelling may indicate a sinus tract. Regular examination for dimples or sinuses is recommended for infants and children with recurrent meningitis or infections. Early detection is crucial to prevent severe complications like meningitis, with Staphylococcus aureus being a common causative organism. Neuroradiological studies, including computed tomography (CT) scan and magnetic resonance imaging (MRI), with histopath...